Directiona to Vintage eams and Timbers
PO Box 548

Email:

Phone: (828) 586-0755
Sylva, NC 28779

info@vintagebeamsandtimbers.com

Fax: (828) 586-4647


Directions To Vintage Beams & Timbers Salvage Yard in Sylva, NC

Centralized Location Map

Central Location Map (Local driving map is at the bottom of this page)

From Knoxville

From Knoxville, TN take I-40 east, and then take the Sevierville exit onto Hwy 441 through Pigeon Forge and Gatlinburg, then across the Smokies into Cherokee.  At the third red light make a right onto Hwy 19.  At the next red light make a right back onto Hwy 441, approximately 4-5 miles take the left exit ramp onto 74 E.  Turn right on Barkers Creek Road about 4.2 miles on Hwy 74 E (Barkers Creek will be about 3/10 mile past Uncle Bill’s Flea Market).  If you pass the Super Track Station on the left of the 4-lane, you have gone too far.  Go across the bridge and railroad tracks, at the 1st fork in the road go left, then go exactly 1 mile (Rockdale Baptist Church will be directly in front of you) and turn right at the bridge.  Go ½ mile and turn left on to Beech Tree Road.  Approximately 8/10 of a mile up Beech Tree Road on the right you will see the Vintage Beams & Timbers sign, turn right to access the timber yard and office.

 

 

From Asheville

From Asheville, NC take I-40 west for about 20-25 miles, then take Hwy 23, which turns into Hwy 74 at Sylva.  Do not take any of the Sylva exits, and after the Dillsboro exit (do not take these exits) drive about 2.7 miles, then turn left on Barkers Creek Road (across from the Exxon and Super Track stations).  Go across the bridge and railroad tracks, at the 1st fork in the road go left, then go exactly 1 mile (Rockdale Baptist Church will be directly in front of you) and turn right at the bridge.  Go ½ mile and turn left on to Beech Tree Road.  Approximately 8/10 of a mile up Beech Tree Road on the right you will see the Vintage Beams & Timbers sign, turn right to access the timber yard and office.

 

From Chattanooga

From Chattanooga, TN take I-75 to Cleveland, then take Hwy 64 which turns into Hwy 64/74, at Andrews, NC it becomes Hwy 19/74, you will travel this road about 50 miles.  Turn Right on Barkers Creek Road about 4. 2 miles past the Cherokee Exit (exit 74) on Hwy 74 E (Barkers Creek will be abut 3/10 mile past Uncle Bill’s Flea Market).  If you pass the Super Track Station on the left of the 4-lane you have gone too far.  Go across the bridge and railroad tracks, at the 1st fork go left, then go exactly 1 mile (Rockdale Baptist Church will be directly in front of you) and turn right at the bridge.  Go ½ mile and turn left on to Beech Tree Road.  Approximately 8/10 of a mile up Beech Tree Road on the right you will see the Vintage Beams & Timbers sign, turn right to access the timber yard and office.

 

From Atlanta

From Atlanta, GA  take I-85 North to I-985, which turns into Hwy 23, which turns into Hwy 441, take Hwy 74/441 exit.  Get in the left lane.  About 2. 7 miles after the exit ramp you will turn left on Barkers Creek Road (across from the Super Track and Exxon stations).  Go across the bridge and railroad tracks, at the 1st fork in the road go left, then go exactly 1 mile (Rockdale Baptist Church will be directly in front of you) and turn right at the bridge.  Go ½ mile and turn left on to Beech Tree Road.  Approximately 8/10 of a mile up Beech Tree Road on the right you will see the Vintage Beams & Timbers sign, turn right to access the timber yard and office.

 

Local Driving Map to Salvage Yard

 
PO Box 548

Email:

Phone: (828) 586-0755
Sylva, NC 28779

info@vintagebeamsandtimbers.com

Fax: (828) 586-4647
 

Most Photography by Gil Stose. NO furniture is made by Vintage Beams unless specified.
Copyright © 2000-2007 [Vintage Beams and Timbers, Incorporated]. All rights reserved.
This site is best viewed 1024 X 768. Last revised: January, 2007 by Echo Valley Creations.